Honeywell Thor VM2 User Manual page 319
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Profile Parameters
Parameter
Edit Profile
SSID
Client Name
Power Save
Tx Power
Bit Rate
Auth Type
EAP Type
Encryption
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Default
Explanation
Default
A string of 1 to 32 alphanumeric characters, establishes the name of the
Profile.
Options are Default or ThirdPartyConfig.
Blank
A string of up to 32 alphanumeric characters. Establishes the Service Set
Identifier (SSID) of the WLAN to which the client connects.
Blank
A string of up to 16 characters. The client name is assigned to the
network card and the device using the network card. The client name may
be passed to networking wireless devices, e.g. Access Points.
CAM
Power save mode.
Options are: Constantly Awake Mode (CAM) power save off, Maximum
(power saving mode) and Fast (power saving mode). When using power
management, use FAST for best throughput results.
Maximum
Maximum setting regulates Tx power to the Max power setting for the
current regulatory domain.
Options are: Maximum, 50mW, 30mW, 20mW, 10mW, 5mW, or 1mW.
Auto
Setting the rate to Auto will allow the Access Point to automatically
negotiate the bit rate with the client device.
This parameter cannot be changed.
Open
802.11 authentication type used when associating with the Access Point.
Options are: Open, LEAP, or Shared key.
None
Extensible Authentication Protocol (EAP) type used for 802.1x
authentication to the Access Point.
Options are: None, LEAP, EAP-FAST, PEAP-MSCHAP, PEAP-GTC, PEAP-
TLS, EAP-TTLS, or EAP-TLS.
Note:
None
Type of encryption to be used to protect transmitted data. Available
options may vary by SCU version.
Options are: None, WEP (or Manual WEP), WEP EAP (or Auto WEP), WPA
PSK, WPA TKIP, WPA CCKM, WPA2 PSK, WPA2 AES, or WPA2 CCKM.
An upgrade to the SCU may be necessary to support CKIP. See
CKIP
for details.
The Encryption type chosen determines if the WEP Keys / PSK Keys
button is active and also determines the available entries in the WEP or
PSK pop-up window.
EAP Type chosen determines whether the Credentials button is
active and also determines the available entries in the
Credentials pop-up window.
Using
307
Advertisement
Table of Contents
