Chapter 4
Error Messages
Table 4-1
Error Messages (continued)
Error Warning
ID
Error Warning Message
EID-6298
The alarm type already exists.
EID-6299
The alarm type does not exist.
EID-6300
Selective auto negotiation is allowed only when
selected speed and duplex modes are non-auto.
Click "Reset" to revert the changes.
WID-6301
Selective auto negotiation applies only to copper SFPs.
EID-6302
Users are not allowed to perform this operation.
EID-6303
The ITU-T G.709 configuration cannot be disabled
when Fast Protection is enabled.
1. EID-3159 can appear if you attempt to perform another switching operation within a certain time interval. This interval is an algorithm of three seconds
per working card in the protection group. The maximum interval is 10 seconds.
November 2009
Description
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
When logged in as a maintainence user
provisioning operation is not allowed.
Refer to the error message text.
Cisco ONS 15454 Troubleshooting Guide, R8.5
4-51