Cisco ONS 15454 Troubleshooting Manual page 528

Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-6016 The card mode cannot be changed to Fibre Channel Line Rate
if the port media type is FICON 1Gbps ISL or FICON 2Gbps
ISL.
EID-6017 The destination of a {0} route cannot be a node IP address.
EID-6018 The destination of a {0} route cannot be the same as the subnet
used by the node.
EID-6019 The destination of a static route cannot be 255.255.255.255
EID-6020 The destination of a static route cannot be the loopback network
(127.0.0.0/8).
EID-6021 The subnet mask length for a non default route must be between
8 and 32.
EID-6022 The subnet mask length for a default route must be 0.
EID-6023 The destination of a {0} route cannot be an internal
network{1}.
EID-6024 The destination of a {0} route cannot be a class D (224.0.0.0/4)
or class E (240.0.0.0/4) address.
EID-6025 The destination of a {0} route cannot be a class A broadcast
address (x.255.255.255/8).
EID-6026 The destination of a {0} route cannot be a class B broadcast
address (x.x.255.255/16).
EID-6027 The destination of a {0} route cannot be a class C broadcast
address (x.x.x.255/24).
EID-6028 The destination of a {0} route cannot be the subnet broadcast
address associated with a node IP address.
EID-6029 The next hop of a static route cannot be the same as the
destination of the route or an internal network{0}.
EID-6030 The next hop of a static default route must be the provisioned
default router.
EID-6031 No more static routes can be created.
EID-6032 This static route already exists.
EID-6033 A previous operation is still in progress.
EID-6035 The parent entity does not exist.
EID-6036 The parent PPM entity does not exist.
EID-6037 This equipment type is not supported.
Cisco ONS 15454 Troubleshooting Guide, R8.5
4-40
Chapter 4
Description
Refer to the error message text.
A node IP address cannot be the destination
for a static route.
Refer to the error message text.
The network address such as
255.255.255.255 is not valid. Enter a valid
address.
Refer to the error message text.
Length of subnet mask must be within the
specified range.
Refer to the error message text.
The destination of a static route must not be
an internal network.
The destination of a static route must not be
a class D or class E address.
The destination of a static route must not be
a class A broadcast address. It should be
(xxx.0.0.0).
The destination of a static route must not be
a class B broadcast address.
The destination of a static route must not be
a class C broadcast address.
The destination of a static route must not be
a subnet broadcast address of a node IP.
Static route must have the default route as
the next hop, and not destination of the
route or internal network.
The default route is selected for networks
that do not have a specific route.
You have reached the maximum number of
static routes.
Refer to the error message text.
Another operation is in progress. You must
try after sometime.
Refer to the error message text.
Create a parent entity for the PPM.
CTC does not support this equipment.
Error Messages
November 2009