Cisco ONS 15454 Troubleshooting Manual page 511

Chapter 4 Error Messages
Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-3165 The ring ID provided is already in use. Ring IDs must be
unique.
EID-3166 An error occurred while refreshing the {0} table.
EID-3167 The slot is already in use.
EID-3168 An error occurred while provisioning.
EID-3169 An error occurred while adding the card.
EID-3170 You cannot delete this card: {0}.
EID-3171 An error occurred while creating the trap destination.
EID-3172 No RMON thresholds were selected.
EID-3173 The contact ''{0}'' cannot exceed {1} characters.
EID-3174 The description ''{0}'' cannot exceed {1} characters.
EID-3175 The operator identifier ''{0}'' cannot exceed {1} characters.
EID-3176 The operator specific information ''{0}'' cannot exceed {1}
characters.
EID-3177 The node name cannot be empty.
EID-3178 The node name ''{0}'' cannot exceed {1} characters.
EID-3179 The protect card is in use.
EID-3180 The 1+1 protection group does not exist.
EID-3181 The Y-cable protection group does not exist.
EID-3182 The topology element is in use and cannot be deleted as
requested.
EID-3183 An error occurred while deleting the protection group.
EID-3184 No {0} was selected.
EID-3185 This ring has an active protection switch operation and cannot
be deleted at this time.
EID-3186 The node is busy: {0} is {1} and cannot be deleted as requested. The request cannot be completed.
EID-3187 An error occurred while deleting the trap destination.
November 2009
Description
Refer to the error message text.
CTC encountered an error while refreshing
the specified table.
Refer to the error message text.
An error was encountered while attempting
the specified provisioning operation. Refer
to the details portion of the error dialog box
for more information.
CTC encountered an error while adding the
card.
Refer to the error message text.
CTC encountered an error creating the trap
destination.
Select an RMON threshold.
The specified contact exceeds the specified
character limit.
The specified location exceeds the specified
character limit.
The specified operator identifier exceeds
the specified character limit.
The specified operator specific information
exceeds the specified character limit.
The specified name is empty.
The specified name exceeds the specified
character limit.
Refer to the error message text.
Create a 1+1 protection group.
Refer to the error message text.
You cannot delete the topology element
which is in use.
CTC encountered an error while deleting
the protection group.
You must select an item before completing
this task.
Refer to the error message text.
CTC encountered an error deleting the trap
destination.
Cisco ONS 15454 Troubleshooting Guide, R8.5
4-23