Cisco ONS 15454 Troubleshooting Manual page 429
Hide thumbs
Also See for ONS 15454:
- Procedure manual (850 pages) ,
- Reference manual (728 pages) ,
- Software feature and configuration manual (232 pages)
Table of Contents
Advertisement
Chapter 2
Alarm Troubleshooting
SSM-SMC is an informational condition and does not require troubleshooting.
Note
2.7.393 SSM-ST2
The SSM Stratum 2 (ST2) Traceable condition occurs when the synchronization message quality level
is changed to ST2.
SSM-ST2 is an informational condition and does not require troubleshooting.
Note
2.7.394 SSM-ST3
The SSM Stratum 3 (ST3) Traceable condition occurs when the synchronization message quality level
is changed to ST3.
SSM-ST3 is an informational condition and does not require troubleshooting.
Note
2.7.395 SSM-ST3E
The SSM Stratum 3E (ST3E) Traceable condition indicates that the synchronization message quality
level is changed to ST3E from a lower level of synchronization. SSM-ST3E is a Generation 2 SSM and
is used for Generation 1.
SSM-ST3E is an informational condition and does not require troubleshooting.
Note
2.7.396 SSM-ST4
November 2009
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: BITS, DS1, E1, NE-SREF, OCN
DWDM Logical Object: TRUNK
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: BITS, DS1, E1, NE-SREF, OCN
DWDM Logical Object: TRUNK
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: BITS, DS1, E1, NE-SREF, OCN
DWDM Logical Object: TRUNK
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: BITS, DS1, E1, NE-SREF, OCN
DWDM Logical Object: TRUNK
Cisco ONS 15454 Troubleshooting Guide, R8.5
2.7.393 SSM-ST2
2-235
Advertisement
Table of Contents
