Figure 1-51 Configuring Vlan Membership For Individual Ethernet Ports - Cisco ONS 15454 Troubleshooting Manual

1.11 Circuits and Timing
Figure 1-51
Step 3 If the port is set to Tagged, continue to look at other cards and their ports in the VLAN until you find
the port that is set to Untag.
At the VLAN port set to Untag, click the port and choose Tagged.
Step 4
Note
After each port is in the appropriate VLAN, click Apply.
Step 5
1.11 Circuits and Timing
This section provides solutions to circuit creation and reporting errors, as well as common timing
reference errors and alarms.
Cisco ONS 15454 Troubleshooting Guide, R8.5
1-134
Configuring VLAN Membership for Individual Ethernet Ports
The attached external devices must recognize IEEE 802.1Q VLANs.
Chapter 1 General Troubleshooting
November 2009