Cisco ONS 15454 Troubleshooting Manual page 462

2.9.2 Protection Switching, Lock Initiation, and Clearing
Step 5 Right-click a BLSR node west port and choose Set West Protection Operation.
In the Set West Protection Operation dialog box, choose Force Span from the drop-down list.
Step 6
Click OK.
Step 7
Click Yes in the two Confirm BLSR Operation dialog boxes that appear.
Step 8
Initiate a Manual Span Switch on a BLSR
From the View menu, choose Go to Network View.
Step 1
Click the Provisioning > BLSR tabs.
Step 2
Step 3 Choose the BLSR and click Edit.
Step 4 Right-click the BLSR node channel (port) and choose Set West Protection Operation (if you chose a
west channel) or Set East Protection Operation (if you chose an east channel).
In the Set West Protection Operation dialog box or the Set East Protection Operation dialog box, choose
Step 5
Manual Span from the drop-down list.
Click OK.
Step 6
Click Yes in the two Confirm BLSR Operation dialog boxes.
Step 7
Initiate a Manual Ring Switch on a BLSR
From the View menu, choose Go to Network View.
Step 1
Step 2 Click the Provisioning > BLSR tabs.
Step 3 Choose the BLSR and click Edit.
Step 4 Right-click the BLSR node channel (port) and choose Set West Protection Operation (if you chose a
west channel) or Set East Protection Operation (if you chose an east channel).
Step 5 In the Set West Protection Operation dialog box or the Set East Protection Operation dialog box, choose
Manual Ring from the drop-down list.
Click OK.
Step 6
Click Yes in the two Confirm BLSR Operation dialog boxes.
Step 7
Initiate a Lockout on a BLSR Protect Span
From the View menu choose Go to Network View.
Step 1
Step 2 Click the Provisioning > BLSR tabs.
Choose the BLSR and click Edit.
Step 3
Right-click the BLSR node channel (port) and choose Set West Protection Operation (if you chose a
Step 4
west channel) or Set East Protection Operation (if you chose an east channel).
Cisco ONS 15454 Troubleshooting Guide, R8.5
2-268
Chapter 2 Alarm Troubleshooting
November 2009