Cisco ONS 15454 Troubleshooting Manual page 308

2.7.137 FRCDSWTOINT
2.7.137 FRCDSWTOINT
The Force Switch to Internal Timing condition occurs when the user issues a FORCE command to switch
to an internal timing source.
FRCDSWTOINT is an informational condition and does not require troubleshooting.
Note
2.7.138 FRCDSWTOPRI
The Force Switch to Primary Timing Source condition occurs when the user issues a FORCE command
to switch to the primary timing source.
Note FRCDSWTOPRI is an informational condition and does not require troubleshooting.
2.7.139 FRCDSWTOSEC
The Force Switch to Second Timing Source condition occurs when the user issues a FORCE command
to switch to the second timing source.
FRCDSWTOSEC is an informational condition and does not require troubleshooting.
Note
2.7.140 FRCDSWTOTHIRD
The Force Switch to Third Timing Source condition occurs when the user issues a Force command to
switch to a third timing source.
FRCDSWTOTHIRD is an informational condition and does not require troubleshooting.
Note
2.7.141 FRNGSYNC
Cisco ONS 15454 Troubleshooting Guide, R8.5
2-114
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Chapter 2 Alarm Troubleshooting
November 2009