Cisco ONS 15454 Troubleshooting Manual page 496

Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-2079 The alarm types cannot be loaded into table.
There are no reachable nodes from which the list of alarm types
can be loaded.
Please wait until such a node is reachable and try again.
EID-2080 The node {0} has no profiles.
EID-2081 An error occurred while removing profile {0} from the node
{1}.
EID-2082 The profile {0} does not exist on the node {1}.
EID-2083 An error occurred while adding profile {0} to the node {1}.
EID-2085 The profile selection is invalid.
No profiles were selected.
EID-2086 The node selection is invalid.
No nodes were selected.
EID-2087 No profiles were selected.
Please select at least one profile.
EID-2088 The profile name is invalid.
EID-2089 Too many copies of {0} exist. Please choose another name.
EID-2090 No nodes were selected.
Please select the node(s) on which to store the profile(s).
EID-2091 Unable to switch to the node {0}.
EID-2092 A general exception error occurred.
EID-2093 The name is too short. It does not have enough characters.
{0}
EID-2094 The password and confirmed password fields do not match.
EID-2095 The password is invalid.
{0}
EID-2096 The user must have a security level.
EID-2097 No user name was specified.
EID-2099 An error occurred while ring switching.
EID-2100 Please select at least one profile to delete.
EID-2101 An error occurred while protection switching.
Cisco ONS 15454 Troubleshooting Guide, R8.5
4-8
Chapter 4
Description
Refer to the error message text.
The specified node does not have any
profiles.
There was an error while removing the
specified profile from the specified node.
CTC cannot find the specified profile from
the specified node.
There was an error adding the specified
profile to the specified node.
You tried to select an invalid profile. Select
another profile.
You tried to select an invalid node. Select
another node.
Refer to the error message text.
The profile name cannot be empty.
Select a unique name.
You must select one or more nodes on
which you can store the profile.
CTC is unable to switch to the specified
node.
CTC encountered a general exception error
while trying to complete the task.
The name must have a minimum of six
characters.
You must make sure the two fields have the
same password.
The password you entered is not allowed.
You must have an assigned security level to
perform this task.
You did not specify a user name.
There was an error during the ring switch.
You have not selected the profile to delete.
There was an error during the protection
switching.
Error Messages
November 2009