Optional Switch for Ethernet Connectivity
Optional Switch for Ethernet Connectivity
The optional 18 port switch allows all second participants to have Ethernet connectivity via the table leg
Ethernet connections.
Adding the Optional Switch
To add the optional switch, perform the following procedure:
Install the switch and switch bracket on the right accessory cabinet.
Step 1
Figure 3-15
Switch and Switch Bracket
Route the cables for the switch. You use six ports for the first row of tables, and 12 ports for the second
Step 2
row of tables.
Cisco TelePresence System
3-18
Chapter 3
Options for the Cisco TelePresence System 3000
53
1
53
OL-16441-01