Manual Instructions - Watch Parameters - GE AKTA avant User Manual

9.8.8

Manual instructions - Watch parameters

The following table describes the watch parameter instructions available for ÄKTA avant.
Instruction name
Watch UV parameters
Watch UV 2nd parame-
ters
Watch cond parameters
Watch pH parameters
Watch flow parameters
Watch pressure parame-
ters
Watch analog in parame-
ters
ÄKTA avant User Manual 29035184 AE
9.8.8 Manual instructions - Watch parameters
Description
Sets the accepted signal fluctuation and Delta peak
limit of the UV signal for some of the tests in the Watch
and Hold until instructions.
Sets the accepted signal fluctuation and Delta peak
limit of the UV 2nd signal for some of the tests in the
Watch and Hold until instructions.
Sets the accepted fluctuation and Delta peak limit of
the conductivity signal for some of the tests in the
Watch and Hold until instructions.
Sets the value for the accepted fluctuation of the pH
signal used for the test Stable signal in the instructions
Watch and Hold until.
Sets the value for the accepted fluctuation of the flow
rate signal used for the test Stable signal in the instruc-
tions Watch and Hold until with signal System flow.
Sets the value for the accepted fluctuation of the pres-
sure signals used for the test Stable signal in the instruc-
tions Watch and Hold until.
Sets the accepted signal fluctuation and Delta peak
limit of the analog signal for some of the tests in the
Watch and Hold until instructions.
9 Reference information
9.8 Using Manual instructions
495