General Performance Test Actions - GE AKTA avant User Manual

6 Performance tests

6.1 General performance test actions

6.1

General performance test actions

Introduction
Some actions are identical for all performance tests. These actions are described in this
section.
Start the performance tests
Follow the instructions to start a performance test.
Step
1
2
3
4
5
240
Action
In the System Control module, on the System menu, click Performance Test
and Report.
Result: The System Performance Test and Report dialog box opens.
In the System Performance Test and Report dialog box, click one of the
following tests:
Test
Air sensors test
Fraction Collector test, Built in frac
Fraction Collector test, F9-R
Quaternary valve test
System test
UV test, U9-L
Click Run Performance Method.
Result: The Start Protocol of the selected test opens.
Click Next in the Start Protocol dialog box to open the next dialog box. The
dialog boxes are described in the table Overview of the Start Protocol dialog,
on page 241.
In the last dialog box of the Start Protocol:Result name and location, click
Start.
Result: The selected test starts.
ÄKTA avant User Manual 29035184 AE