5 Operation
5.7 Sample application
5.7.1 Sample application using direct injection into the column
When preparing to
inject...
all the sample
192
Then...
in the Method editor, make the following selections
•
for the Sample Application phase of the method to
be run:
select Inject sample directly onto column, and
-
select Inject all sample using air sensor.
-
manually prime the sample inlet tubing with sample
•
or buffer, see Prime sample inlets, on page 173, and
make sure that the tubing is immersed in sample be-
fore starting the run.
make sure that the flow path from the sample inlet
•
valve up to the injection valve is filled with sample or
an appropriate buffer and that the buffer inlet tubing
is immersed in buffer.
ÄKTA avant User Manual 29035184 AE