Prepare Fraction Collector F9-R - GE AKTA avant User Manual

5 Operation
5.8 Fractionation

5.8.2 Prepare Fraction collector F9-R

5.8.2 Prepare Fraction collector F9-R
Introduction
This subsection describes how to prepare and assemble Fraction collector F9-R before
a run.
Fraction collector F9-R can be connected to ÄKTA avant and controlled by UNICORN.
The fraction collector can be automatically controlled in a method run or manually
controlled.
Prepare the fraction collector
Before starting to prepare the Fraction collector F9-R, check the fractionation settings
in the method to be run. Perform the steps described below according to the settings in
the method.
•
•
•
•
Illustration of the tube rack
Note:
210
Assemble the Tube rack
Insert collection tubes
Adjust the Delivery arm
Update System Settings in UNICORN
6
5
4
Note that the tube guide has both single and L-shaped cutouts, while the tube
holder only has single cutouts.
Part
1
1
2
2
3
4
5
3
6
Function
Single cutout
L-shaped cutout
Bowl
Tube support
Tube guide
Tube holder
ÄKTA avant User Manual 29035184 AE