GE AKTA avant User Manual page 160

Hide thumbs Also See for AKTA avant:

Table of Contents

5.2 Prepare the flow path

Instructions

The following steps describe how to prepare the waste tubing.

Waste tubing from the Injection valve, the pH valve and the Outlet valve

(W, W1, W2 and W3).

Waste tubing from the Fraction collector and the Buffer tray.

Place the four pieces of waste tubing from the Injection valve, the pH valve

and the Outlet valve (W, W1, W2 and W3) in a vessel placed below the bench.

The maximum level of the waste vessel for the waste

tubing from the valves must be lower than 30 cm

above the lab bench.

Place the three pieces of waste tubing from the Fraction collector and the

Buffer tray in a waste vessel placed below the bench.

The maximum level of the waste vessel for the waste

tubing from the Fraction collector and the Buffer tray

must be lower than the bench height.

ÄKTA avant User Manual 29035184 AE

Troubleshooting