GE AKTA avant User Manual page 417

Conductivity monitor
Error
code
20-27
28
29
32-34
Pump
Error
code
51-53
54
UV Monitor U9-M
Error
code
21, 25, 26,
31
22, 23, 32
24
27
ÄKTA avant User Manual 29035184 AE
Description
Internal instrument error
High temperature
Temperature data error
No factory calibration
Description
Internal pump error
High temperature
Description
Grating error
Block filter error
Internal instrument error
Spectrum calibration error
8 Troubleshooting
Action
Restart the instrument. If recurrent please
contact Service.
See Conductivity monitor, on page 372
Restart the instrument. If recurrent please
contact Service.
Contact Service
Action
Check that there is no blockage of the
pump outlet. Restart the instrument. If
recurrent please contact Service.
See Section 8.6 Troubleshooting: Pumps,
on page 397
Action
Restart the instrument. If recurrent please
contact Service.
Restart the instrument. If recurrent please
contact Service.
Restart the instrument. If recurrent please
contact Service.
Restart the instrument. If recurrent please
contact Service.
8.9 Error codes
417