Prime Inlets And Purge Pump Heads - GE AKTA avant User Manual

5.4

Prime inlets and purge pump heads

About this section
Before usage of a pump, it is important to:
•
•
This section describes how to prime inlets and purge the pump heads of the system
pumps and the sample pump.
Note:
In this section
This section contains the following subsections:
Section
5.4.1 Prime buffer inlets and purge system pumps
5.4.2 Prime sample inlets and purge Sample Pump
5.4.3 Prime Q inlets
ÄKTA avant User Manual 29035184 AE
Prime the inlets (fill the buffer inlets with liquid).
Purge the pump (remove air from the pump heads).
Note that the procedures described in this section may have to be adapted if
your system configuration differs from the one described in this manual.

5.4 Prime inlets and purge pump heads

5 Operation
See page
166
173
178
165