Brake Hoses/Lines
L
J
Inspection/Torque Specifications
t. Inspect the brake hoses for damage, deterioration, leaks, interference, and twisting.
2. Check the brake lines for damage, rusting. and leakage. Also check for bent brake lines.
3. Check for ieaks at hose and line ioints and connections, and retighten if necessary'
4. Check the master cylinder and ABS modulator unit for damage and leakage
CAUTION: Replace tho brake hose clip whenev€r the brake hose is serviced.
ABS MODULATOR UNIT-Io-BRAKE l-lNE
19 N.m (1.9 kgf.m, 14lbl.ftl
PROPOBTIONING CONTROL VALVE.
io-BRAKE LINE
l5 N.m (1.5
11 tbf.ftl
MASTER CYLINDER-Io-BMKE LINE
15 N.m (1.5 ksrf.m, 11 lbf'ft)
REAR DISG BRAKE:
BRAKE HOSE-to4ALlPER
{BANJO BOLT}
34 N.m (3.5 kgtm,25 lbf ftl
BLEEO SCREW
9 N'm (0.9 kgf.m, 6.5 lM.ftl
BRAKE LINE-to-WHEEL CYLINDER
15 N.m (1.5 kgl.m, 11 lbf.ftl
BLEED SCREW
7 N.m {0.7 kst m, 5 lbf,ttl
J
BRAKE LINE-io-aRAKE HOSE
15 N.m {1.5
11 tbtft)
BRAKE LINE-Io-BRAKE HOSE
15 N.m (1.5 kgt.m, 11 lbf'ft)
(BANJO BOLT}
3,1 N.m 13.5 kgf.m, 25 lbf.ft)
J
1 9 - 3 9