Rear Brake Caliper; Disassembly - Honda Civic Service Manual

Rear Brake Caliper
Disassembly
@
f
l',lever use an air hose or dry brush to clean
assemblies.
. Use an OsHA-approved vacuum cleaner to
brake
avoid
breathing brake dust.
. Contaminated brake discs or pads reduce stopping
ability.
CAUTION:
. Do not spill brake tluid on the cal; h may damage the
paint; if brake fluid does contact the paint, wash ii
ofl immediatelY with water.
. To prevent spills, cover the hose ioints whh rags or
shop tow€ls.
. Clean all parts in brake fluid and air dry; blow out all
passagss with complessed air.
1. Remove the caliper shield (see page 19-24).
2 .
R e m o v e t h e l o c k p i n a n d c l e v i s p i n . R e m o v e t h e
cable clip, and disconnect the cable from the arm
CABLE CLIP
Remove the banjo bolt and two sealing washers
Remove the two caliper mounting bolts and caliper
body from the bracket.
CALIPER MOUNTNG AOLTS
CALIPER BRACKET
Check for cracks
SEALING
WASHERS
Replace.
BANJO
BOLT
5 , R e m o v e t h e p i n s a n d p i n b o o t s f r o m t h e c a l i p e r
bracket.
6.
Remove the pad spring from the caliper body
P I N A
(cont'd)
19-27