Brake Shoe Disassembly; Brake Shoe Reassembly - Honda Civic Service Manual

t
-
Brake Shoe Disassembly
1 . R e m o v e t h e t e n s i o n p i n s b y p u s h i n g t h e r e t a i n e r
springs and turning them.
TENSION PINS
RETAINER SPRINGS
Lower the brake shoe assembly, and remove the
lower return spring.
NOTEi Be careful not to damage the dust cover on
the wheel cylinder.
Remove the brake shoe assembly.
Disconnect the parking brake cable from the parking
brake lever.
Remove the upper return spring, self-adjuster lever,
a n d s e l f - a d j u s t e r s p r i n g , a n d s e p a r a t e t h e b r a k e
snoe5.
t
3.
4 .
ADJUSTEB BOLT
Check ratchet teeth for
wear ano oamage.
UPPER RETURN SPRING
Check for weakness
a n o o a m a g e .
ll
, ' /
N
r
//
t
6.
Remove the wave washer, parking brake lever, and
pivot pin from the brake shoe by removing the U-
c l r p .
PARKING ERAKE
I-EVER
WAVE WASHER
/
@ @
I
I
U-CLIP
Replace.
Brake Shoe Reassembly
1 . Apply brake cylinder grease (P/Nr 08733 - B020E) or
equivalent rubber grease to the sliding surface of
the pivot pin, and insert the pin into the brake shoe.
Install the parking brake lever and wave washer on
the pivot pin and secure them with the U-clip,
NOTE: Pinch the U-clip securely to prevent the pivot
pin from coming out of the brake shoe.
,6;::"'
(cont'd)
19-37
LEVER