Debug Mcast - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug mcast

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug mcast
To enable debugging for multicast definitions, use the debug mcast command in EXEC mode. To disable
a debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description all
error
vsan vsan-id
interface fc slot/port
event
mts
pkt
both
rx
node range
opcode range
sap range
tx
pkthdr
numpkt
trace
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Cisco MDS 9000 Family Command Reference
6-78
debug mcast {all | error [vsan vsan-id] [interface fc slot/port] | event [vsan vsan-id] [interface fc
slot/port] | mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both |
rx [numpkt range] | tx}} | trace [vsan vsan-id] [interface fc slot/port]]
no debug mcast {all | error [vsan vsan-id] [interface fc slot/port] | event [vsan vsan-id] [interface
fc slot/port] | mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both
| rx [numpkt range] | tx}} | trace [vsan vsan-id] [interface fc slot/port]]
Modification
This command was introduced.
Enables debugging for all multicast definitions.
Enables debugging for multicast errors.
(Optional) Restricts debugging to the specified VSAN.
(Optional) Restricts debugging to the specified interface.
Enables debugging for multicast events.
Enables debugging for multicast tx/rx MTS events.
Specifies debugging of packets.
Specifies debugging in both the transmit and receive direction.
Specifies debugging in the receive direction.
Specifies the node for the packets in the receive direction. The integer
range is from 1 to 4096.
Specifies the opcode for the packets in the receive direction. The integer
range is from 1 to 4096.
Specifies the sap for the packets in the receive direction.The integer
range is from 1 to 4096.
Specifies debugging in the transmit direction,
Specifies debugging of headers.
Specifies the number of required packets.
Enables debugging for multicast traces.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x