Commit (Dmm Job Configuration Submode) - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

commit (DMM job configuration submode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
commit (DMM job configuration submode)
To commit a DMM job, use the commit command in DMM job configuration submode. To remove the
DMM job, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
DMM job configuration submode.
Command History Release
3.2(1)
Usage Guidelines You need to configure server HBA ports, storage ports, and job attributes before you commit the job.
Examples
The following example shows how to commit a data migration job:
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# dmm module 3 job 1 destroy
switch(config-dmm-job)#
Related Commands Command
show dmm job
show dmm srvr-vt-login
Cisco MDS 9000 Family Command Reference
4-114
commit
no commit
Modification
This command was introduced.
Description
Displays job information.
Enables DMM.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x