Isns Profile Name - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

isns profile name

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
isns profile name
To create an Internet Storage Name Service (iSNS) profile and enter iSNS profile configuration
submode, use the isns profile name command in configuration mode. To delete the iSNS profile, use
the no form of the command.
Syntax Description
profile-name
Defaults None.
Command Modes Configuration mode.
Command History Release
1.3(1)
Usage Guidelines To use this command, iSNS must be enabled using the isns-server enable command.
Examples The following example shows how to specify an iSNS profile name and enter iSNS profile configuration
submode.
switch# config terminal
switch(config)# isns profile name UserProfile
switch(config-isns-profile)#
Related Commands Command
server
show isns
Cisco MDS 9000 Family Command Reference
11-118
isns profile name profile-name
no isns profile name profile-name
Specifies the profile name. Maximum length is 64 characters.
Modification
This command was introduced.
Description
Configures a server IP address in an iSNS profile.
Displays iSNS information.
Chapter 11 I Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x