Ivr Refresh - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ivr refresh

To refresh devices being advertised by Inter-VSAN Routing (IVR), use the ivr refresh command in
EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
2.0(2)
Usage Guidelines Ivr refresh command runs internally when ivr zoneset or topology is activated. The limit for the maximum
number of IVR zones per VSAN is 250 zones (two members per zone).
Examples
The following example shows refresh devices being advertised by IVR.
switch# ivr refresh
Related Commands Command
ivr enable
ivr withdraw domain
OL-18089-01, Cisco MDS NX-OS Release 4.x
ivr refresh
Modification
This command was introduced.
Description
Enables the Inter-VSAN Routing (IVR) feature.
Withdraws an overlapping virtual domain from a specified VSAN.
Cisco MDS 9000 Family Command Reference
ivr refresh
11-131