Nport Pwwn - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 16 N Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

nport pwwn

To configure the nport pWWN for the SAN extension tuner, use the nport pwwn command in SAN
extension configuration mode. To revert to the default value, use the no form of the command.
Syntax Description pwwn-id
vsan vsan-id
interface gigabitethernet
slot/port
Defaults None.
Command Modes
SAN extension configuration mode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples The following example shows how to add an entry to the SAN extension tuner database.
switch# san-ext-tuner
switch(san-ext)# nport pwwn 11:22:33:44:55:66:77:88 vsan 1 interface gigabitethernet 1/1
Related Commands Command
san-ext-tuner
show san-ext-tuner
OL-18089-01, Cisco MDS NX-OS Release 4.x
nport pwwn pwwn-id vsan vsan-id interface gigabitethernet slot/port
no nport pwwn pwwn-id vsan vsan-id interface gigabitethernet slot/port
Modification
This command was introduced.
Description
Enters SAN extension configuration mode.
Shows SAN extension tuner information.
Specifies the port WWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal number.
Specifies the VSAN ID. The range is 1 to 4093.
Specifies the Gigabit Ethernet interface slot and port.
Cisco MDS 9000 Family Command Reference
nport pwwn
16-7