Show And Debug Command Examples - Cisco Nexus 7000 Series Configuration Manual

Configuring ACI WAN Interconnect
fabric 1
fabric 2
Default port for connecting to the OpFlex proxy server on the spine is 8009.
Note
4) Per-tenant configuration
In a scenario, where the DCI is connected to multiple ACI PODs, and has an OpFlex framework to each
POD, spines in each POD will send a tenant policy update with the BGP RT value used by that POD. DCI
will add each RT as an import/export RT for the tenant VRF in question.
Following per-tenant configuration will be auto-generated on receiving fabric tenant ADD event for the
first time:
vrf context cust1
vni 10000
rd auto
address-family ipv4 unicast
address-family ipv6 unicast
router bgp 65000
vrf cust1
interface nve 1
member vni 10000 associate-vrf
vni 10000
bridge-domain 100
member vni 10000
interface bdi 100
vrf member cust1
ip forward
no ip redirects
ipv6 forward
no ipv6 redirects
no shutdown
ipp tenant cust1 1

Show and Debug Command Examples

The following examples list the show and debug commands that are used in IPP configuration.
switch# show ipp internal ?
event-history
mem-stats
pss
work-info
switch# show ipp internal debug
IPP Debug information
Debug Flags
opflex-peer 10.2.2.2 8009
ssl encrypted
opflex-peer 10.2.3.2 8009
ssl encrypted
route-target import 1000:1000 evpn
route-target export 1000:1000 evpn
route-target import 1000:1000 evpn
route-target export 1000:1000 evpn
address-family ipv4 unicast
advertise l2vpn evpn
address-family ipv6 unicast
advertise l2vpn evpn
Show various event logs of IPP
Dynamic memory stats
Internal IPP pss info
Internal IPP worker thread info
: Off
Cisco Nexus 7000 Series NX-OS VXLAN Configuration Guide
Show and Debug Command Examples
75