Interface Vsan - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

interface vsan

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
interface vsan
To configure a VSAN interface, use the interface vsan command. To remove a VSAN interface, use the
no form of the command.
Syntax Description vsan-id
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example selects a VSAN interface and enters interface configuration submode:
switch# config terminal
switch(config)# interface vsan 1
switch(config-if)#
Related Commands Command
show interface
Cisco MDS 9000 Family Command Reference
11-40
interface vsan vsan-id
no interface vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays interface configuration for specified interface.
Chapter 11 I Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x