Attributes (Dmm Job Configuration Submode) - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

attributes (DMM job configuration submode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
attributes (DMM job configuration submode)
To set the attributes of a data migration job, use the attributes command in DMM job configuration
submode. To remove the attributes of a data migration job, use the no form of the command.
Syntax Description job_type {1 | 2}
job_mode {1 | 2}
job_rate {1 | 2 | 3 | 4}
job_method {1|2}
Defaults None.
Command Modes DMM job configuration submode.
Command History Release
3.3(1a)
Usage Guidelines None.
Examples The following example sets the job type to storage, the job mode to online, and the job rate to fast:
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# dmm module 3 job 1 create
Started New DMM Job Configuration.
Do not exit sub-mode until configuration is complete and committed
switch(config-dmm-job)# attributes job_type 2 job_mode 1 job_rate 4 job_method 1
switch(config-dmm-job)#
Related Commands Command
show dmm job
show dmm srvr-vt-login
Cisco MDS 9000 Family Command Reference
2-30
attributes job_type {1 | 2} job_mode {1 | 2} job_rate {1 | 2 | 3 | 4} job_method {1|2}
no attributes job_type {1 | 2} job_mode {1 | 2} job_rate {1 | 2 | 3 | 4} job_method {1|2}
Specifies the job type. Specify 1 for a server type job and 2 for a storage type
job.
Specifies the job mode. Specify 1 for an online job and 2 for an offline job.
Specifies the job rate. Specify 1 for the default rate, 2 for a slow rate, 3 for a
medium rate, and 4 for a fast rate.
Specifies the job method. Specify 1 for Method 1 and 2 for Method 2.
Modification
This command was introduced.
Description
Displays job information.
Displays server VT login information.
Chapter 2 A Commands
OL-18089-02, Cisco MDS NX-OS Release 4.x