Cimserver Clearcertificate - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

cimserver clearcertificate

To clear the cimserver certificate, use the cimsever clearcertificate command in configuration mode.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History Release
3.3(1a)
Usage Guidelines
You need not specify the certificate name.
Examples
The following example shows how to clear the cimserver certificate:
switch# config
Enter configuration commands, one per line.
switch(config)# cimserver clearcertificate
Related Commands Command
show cimserver
certificate name
OL-18089-01, Cisco MDS NX-OS Release 4.x
cimserver clearcertificate
Modification
This command was introduced.
Description
Displays cimserver certificate file name.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
cimserver clearcertificate
4-25