Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 613

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
During a software upgrade to Cisco MDS SAN-OS 3.1(3), all modules that are online are tested and the
Tip
installation stops if any modules are running with a faulty CompactFlash. When this occurs, the switch
can not be upgraded until the situation is corrected. A system message displays the module information
and indicates that you must issue the system health cf-crc-check module CLI command to
troubleshoot.
To copy a remote file, specify the entire remote path exactly as it is.
If a switchover is required when you issue the install all command from a Telnet or SSH session, all
Caution
open sessions are terminated. If no switchover is required, the session remains unaffected. The software
issues a self-explanatory warning at this point and provides the option to continue or terminate the
installation.
See the Cisco MDS 9000 Family CLI Configuration Guide for detailed procedures.
Examples
The following example displays the result of the install all command if the system and kickstart files are
specified locally:
switch# install all sys bootflash:isan-1.3.1 kickstart bootflash:boot-1.3.1
Verifying image bootflash:/boot-1.3.1
[####################] 100% -- SUCCESS
Verifying image bootflash:/isan-1.3.1
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/isan-1.3.1.
[####################] 100% -- SUCCESS
Extracting "ips" version from image bootflash:/isan-1.3.1.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/isan-1.3.1.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/boot-1.3.1.
[####################] 100% -- SUCCESS
Extracting "loader" version from image bootflash:/boot-1.3.1.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module
------
Images will be upgraded according to following table:
OL-18089-01, Cisco MDS NX-OS Release 4.x
bootable Impact
-------- --------------
1 yes non-disruptive
2 yes disruptive
3 yes disruptive
4 yes non-disruptive
5 yes non-disruptive
6 yes non-disruptive
Install-type Reason
------------ ------
rolling
rolling Hitless upgrade is not supported
rolling Hitless upgrade is not supported
rolling
reset
reset
Cisco MDS 9000 Family Command Reference
install all
11-7