Ntp Abort - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

ntp abort

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ntp abort
To discard the Network Time Protocol (NTP) Cisco Fabric Services (CFS) distribution session in
progress, use the ntp abort command in configuration mode.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples The following example shows how to configure NTP CFS distribution session in progress.
switch# config terminal
switch(config)# ntp abort
Related Commands Command
ntp distribute
show ntp
Cisco MDS 9000 Family Command Reference
16-12
ntp abort
Modification
This command was introduced.
Description
Enables CFS distribution for NTP.
Displays NTP information.
Chapter 16 N Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x