Ntp Sync-Retry - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 16 N Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ntp sync-retry

To retry synchronization with configured servers, use the ntp sync-retry command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
4.1(1b)
3.3(1a)
Usage Guidelines None.
If user changes the mgmt0 ip address, san-os should conditionally do an internal ntp sync-retry.
Note
Examples The following example displays the sup-fc0 message logs:
switch# ntp sync-retry
Related Commands Command
ntp distribute
show ntp
OL-18089-01, Cisco MDS NX-OS Release 4.x
ntp sync-retry
Modification
Added a note.
This command was introduced.
Description
Enables CFS distribution for NTP.
Displays NTP information.
Cisco MDS 9000 Family Command Reference
ntp sync-retry
16-15