Bport; Bport-Keepalive - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 3 B Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

bport-keepalive

To configure keepalive responses for B port FCIP interfaces, use the bport-keepalive option. To disable
keepalive responses for B port FCIP interfaces, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
Disabled.
Command Modes
Interface configuration submode.
Command History Release
1.1(1)
Usage Guidelines Access this command from the switch(config-if)# submode.
Examples
The following example shows how to configure keepalive responses for B port FCIP interfaces:
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# bport-keepalives
Related Commands Command

bport

show interface fcip
OL-18089-01, Cisco MDS NX-OS Release 4.x
bport-keepalive
no bport-keepalive
Modification
This command was introduced.
Description
Configures a B port FCIP interface.
Displays an interface configuration for a specified FCIP interface.
Cisco MDS 9000 Family Command Reference
bport-keepalive
3-7