Action Exception Log - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

action exception log

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
action exception log
To log an exception if the specific conditions are encountered when an Embedded Event Manager (EEM)
applet is triggered, use the action exception log command.
Syntax Description number. number2
module module
syserr error
devid id
errtype type
errcode code
phylayer layer
ports list
harderror error
desc string
Defaults None.
Command Modes
Embedded Event Manager mode.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples The following example shows how to log an EEM applet exception:
switch# configure terminal
switch(config)# event manager applet exception-applet
switch(config-applet)# action 1.42 exceptionlog module 1 syserr 13 devid 1 errtype fatal
errcode 13 phylayer 2 ports 1-42 harderror 13 desc "fatal exception logging"
switch(config-applet)#
Related Commands Command
event manager applet
Cisco MDS 9000 Family Command Reference
2-16
action number [.number2] exception log module module syserr error devid id errtype type
errcode code phylayer layer ports list harderror error [desc string]
Number can be any number up to 16 digits. The range for number2 is from
0 to 9.
Records an exception for the specified module. Enter a module word.
Records an exception for the specified system error. Enter an error word.
Records an exception for the specified device ID. Enter an id word.
Records an exception for the specified error type. Enter a type word.
Records an exception for the specified error code. Enter a code word.
Records an exception for the specified physical layer. Enter a layer word.
Records an exception for the specified ports. Enter a list word.
The reset reason is a quoted alphanumeric string upto 80 characters.
(Optional) Describes the exception logging condition.
Modification
This command was introduced.
Description
Displays an applet with the Embedded Event Manager.
Chapter 2 A Commands
OL-18089-02, Cisco MDS NX-OS Release 4.x