Action Event-Default - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 2 A Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

action event-default

To execute the default action for the associated event, use the action event-default command. To disable
the default action, use the no form of the command.
Syntax Description number
.number2
Defaults
None.
Command Modes Embedded Event Manager mode.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples
The following example shows how to specify that the default action of the event be performed when an
EEM applet is triggered:
switch# configure terminal
switch(config)# event manager applet default-applet
switch(config-applet)# action 1.0 event-default
switch(config-applet)#
Related Commands Command
event manager applet
OL-18089-02, Cisco MDS NX-OS Release 4.x
action number [.number2] event-default
no action number[.number2] event-default
Number can be any number up to 16 digits. The range for number2 is from
0 to 9.
Modification
This command was introduced.
Description
Displays an applet with the Embedded Event Manager.
Cisco MDS 9000 Family Command Reference
action event-default
2-15