Debug Cimserver - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug cimserver

To enable debugging for the Common Information Model (CIM) management applications function, use
the debug cimserver command in EXEC mode. To disable a debug command use the no form of the
command or use the no debug all command to turn off all debugging.
Syntax Description
all
errors
events
mts
trace
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.3(1)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug cimserver all command is issued:
switch# debug cimserver all
2004 Mar 29 20:05:22 cimsrvprov: cim_mts_dispatch(): Opcode is 182
Related Commands Command
no debug all
show cimserver
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug cimserver {all | errors | events | mts | trace}
no debug cimserver {all | errors | events | mts | trace}
Modification
This command was introduced.
Description
Disables all debugging.
Displays the CIM configurations and settings.
Enables debugging for all CIM features.
Enables debugging for CIM error conditions.
Enables debugging for CIM events.
Enables debugging for CIM tx/rx MTS packets.
Enables debugging for CIM traces.
Cisco MDS 9000 Family Command Reference
debug cimserver
6-15