Dpvm Distribute; Dpvm Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

dpvm distribute

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
dpvm distribute
To enable Cisco Fabric Services (CFS) distribution for dynamic port VSAN membership (DPVM), use
the dpvm distribute command. To disable this feature, use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
Enabled.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Temporary changes to the DPVM database must be committed to the active DPVM database using the
dpvm commit command before being distributed to the fabric.
Examples
The following example shows how to disable distribution for the DPVM database:
switch# config terminal
switch(config)# no dpvm distribute
The following example shows how to enable distribution for the DPVM database:
switch# config terminal
switch(config)# dpvm distribute
Related Commands Command

dpvm enable

show dpvm
Cisco MDS 9000 Family Command Reference
5-54
dpvm distribute
no dpvm distribute
Modification
This command was introduced.
Description
Enables DPVM.
Displays DPVM information.
Chapter 5 D Commands
OL-18089-01, Cisco NX-OS Release 4.x