Snmp-Server Enable Traps Link Cisco - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

snmp-server enable traps link cisco

To enable Cisco cieLinkUp and cieLinkDown traps, use the snmp-server enable traps link cisco
command in configuration mode. To disable Cisco link trap, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines None.
Examples
The following example shows how to enable SNMP FC domain traps.
switch# config t
switch(config)# snmp-server enable traps link cisco
switch(config)#
switch(config)# no snmp-server enable traps link
switch(config)#
Related Commands Command
show snmp
show snmp trap
OL-18089-01, Cisco MDS NX-OS Release 4.x
snmp-server enable traps link cisco
no snmp-server enable traps link
Modification trap
This command was introduced.
Description
Displays SNMP information.
Displays SNMP traps.
snmp-server enable traps link cisco
Cisco MDS 9000 Family Command Reference
21-49