Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 371

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug dmm-debug
To enable debugging for DMM, use the debug dmm-debug command.
Syntax Description all
common-err
common-ev
fsm
init
itl-err
itl-ev
job-err
job-ev
msghndlr-err
msghndlr-ev
p2p-err
p2p-ev
timer
vi-lun-err
vi-lun-ev
vi-tgt-err
vi-tgt-ev
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
3.2(1)
Usage Guidelines
You must connect to an SSM on your switch to execute DMM debug commands. Use the show module
command to determine the slot number of an SSM on your switch. Use the attach module command to
connect to the SSM.
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug dmm-debug {all | common-err | common-ev | fsm | init | itl-err | itl-ev | job-err | job-ev |
msghndlr-err | msghndlr-ev | p2p-err | p2p-ev | timer | vi-lun-err | vi-lun-ev | vi-tgt-err |
vi-tgt-ev}
Enables all DMM debug options.
Enables debugging for DMM common errors.
Enables debugging for DMM common events.
Enables debugging for DMM FSM.
Enables debugging for DMM initialization.
Enables debugging for DMM initiator-target-LUN-triplet (ITL) errors.
Enables debugging for DMM ITL events.
Enables debugging for DMM job errors.
Enables debugging for DMM job events.
Enables debugging for DMM message handler errors.
Enables debugging for DMM message handler events.
Enables debugging for DMM peer-to-peer (P2P )errors.
Enables debugging for DMM P2P events.
Enables debugging for the DMM timer.
Enables debugging for VI LUN errors.
Enables debugging for VI LUN events.
Enables debugging for VI and target errors.
Enables debugging for VI and target events.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
debug dmm-debug
6-21