Clear Dpvm - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

clear dpvm

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear dpvm
To clear Dynamic Port VSAN Membership (DPVM) information, use the clear dpvm command.
Syntax Description
auto-learn
pwwn pwwn-id
session
Defaults None.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, DVPM must be enabled using the dpvm enable command.
Examples The following example shows how to clear a single autolearned entry:
switch# clear dpvm auto-learn pwwn 21:00:00:20:37:9c:48:e5
The following example shows how to clear all autolearn entries.
switch# clear dpvm auto-learn
The following example shows how to clear a session:
switch# clear dpvm session
Related Commands Command
dpvm enable
show dpvm
Cisco MDS 9000 Family Command Reference
4-42
clear dpvm {auto-learn [pwwn pwwn-id] | session}
Clears automatically learned (autolearn) DPVM entries.
(Optional) Specifies the pWWN ID. The format is
hh:hh:hh:hh:hh:hh:hh:hh, where h is a hexadecimal number.
Clears the DPVM session and locks.
Modification
This command was introduced.
Description
Enables DPVM.
Displays DPVM database information.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x