Snmp-Server Traps Entity Fru - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

snmp-server traps entity fru

To enable SNMP entity FRU trap, use the snmp-server traps entity fru command in configuration
mode. To disable entity FRU trap, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines None.
Examples
The following example shows how to enable SNMP entity FRU trap.
switch# config t
switch(config)# snmp-server enable traps entity fru
switch(config)#
Related Commands Command
show snmp
show snmp trap
OL-18089-01, Cisco MDS NX-OS Release 4.x
snmp-server enable traps entityfru
no snmp-server enable traps entity fru
Modification trap
This command was introduced.
Description
Displays SNMP information.
Displays SNMP traps.
snmp-server traps entity fru
Cisco MDS 9000 Family Command Reference
21-47