Copy Ssm-Nvram Standby-Sup - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

copy ssm-nvram standby-sup

To copy the contents of the Storage Services Module (SSM) NVRAM to the standby Supervisor 2
module when migrating from a Supervisor 1 to Supervisor 2 module, use the copy ssm-nvram
standby-sup command in EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines This command should only be used for migrating from a Supervisor 1 to a Supervisor 2 module. When
both modules in the switch are the same, you should not use this command; use the copy command
instead.
Examples The following example copies the contents of the SSM NVRAM to the standby Supervisor 2 module:
switch# copy ssm-nvram standby-sup
Related Commands Command
copy
OL-18089-01, Cisco MDS NX-OS Release 4.x
copy ssm-nvram standby-sup
Modification
This command was introduced.
Description
Saves a backup of the system software.
copy ssm-nvram standby-sup
Cisco MDS 9000 Family Command Reference
4-121