Debug Ilc_Helper - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug ilc_helper

To enable ILC helper debugging, use the debug ilc_helper command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description all
errors
events
info
Defaults
Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug ilc_helper all command is issued:
switch# debug ilc_helper all
For Application :125, sdwrap:mts_send : Broken pipe
Related Commands Command
no debug all
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug ilc_helper {all | errors | events | info}
no debug ilc_helper {all | errors | events | info}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for all ILC helper features.
Enables debugging for ILC helper error conditions.
Enables debugging for the ILC helper events.
Enables debugging for ILC helper information.
Cisco MDS 9000 Family Command Reference
debug ilc_helper
6-61