Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 976

sme
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
sme
To enable or disable the Cisco SME services, use the sme command.
Syntax Description
cluster
name
transport
ssl
trustpoint
trustpoint label
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
3.2(2c)
Usage Guidelines Cisco SME services must be enabled to take advantage of the encryption and security features.
To use this command, you must enable Cisco SME clustering using the feature cluster command.
Examples The following example shows how to configure a cluster:
switch# config t
sw-sme-n1(config)# sme cluster clustername
sw-sme-n1(config-sme-cl)#
Cisco MDS 9000 Family Command Reference
21-38
sme{cluster name | transport ssl trustpoint trustpoint label }
Configures the cluster.
Identifies the cluster name.
Configures the transport information.
Configures the transport SSL information.
Configures the transport SSL trustpoint.
Identifies the trustpoint label.
Modification
This command was introduced.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x