Clear Rlir - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear rlir

To clear the Registered Link Incident Report (RLIR), use the clear rlir command in EXEC mode.
On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
Note
BladeCenter, the syntax differs as follows:
interface bay port | ext port
Syntax Description history
recent
interface fc slot/port
bay port | ext port
portnumber port-number
statistics
vsan vsan-id
Defaults
None.
Command Modes
EXEC mode.
Command History Release
1.3(1)
3.1(2)
Usage Guidelines None.
Examples The following example clears all existing statistics for a specified VSAN:
switch# clear rlir statistics vsan 1
The following example clears the link incident history:
switch# clear rlir history
The following example clears recent RLIR information for a specified interface:
switch# clear rlir recent interface fc 1/2
OL-18089-01, Cisco MDS NX-OS Release 4.x
clear rlir {history | recent {interface fc slot/port | portnumber port-number} |
statistics vsan vsan-id}
Modification
This command was introduced.
Added the interface bay | ext option.
Clears RLIR link incident history.
Clears recent link incidents.
Clears entries for a specified interface.
Clears entries for a specified interface on a Cisco Fabric Switch for HP
c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter.
Displays the port number for the link incidents.
Clears RLIR statistics.
Specifies the VSAN ID for which the RLIR statistics are to be cleared.
Cisco MDS 9000 Family Command Reference
clear rlir
4-75