Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 138

bport
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
bport
To configure a B port mode on a FCIP interface, use the bport option. To disable a B port mode on a
FCIP interface, use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes
Interface configuration submode.
Command History Release
1.1(1)
Usage Guidelines Access this command from the
Examples
The following example shows how to configure a B port mode on an FCIP interface:
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# bport
Related Commands Command
bport-keepalive
show interface fcip
Cisco MDS 9000 Family Command Reference
3-6
bport
no bport
Modification
This command was introduced.
Description
Configures B port keepalive responses.
Displays an interface configuration for a specified FCIP interface.
submode.
switch(config-if)#
Chapter 3 B Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x