Shared-Keymode - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

shared-keymode

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
shared-keymode
To configure the shared key mode, use the shared-keymode command. To specify the unique key mode,
use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines The shared-keymode command generates a single key that is used for a group of backup tapes.
The no shared-keymode generates unique or specific keys for each tape cartridge.
The shared unique key mode should be specified if you want to enable the key-ontape feature.
Note
Examples The following example specifies the shared key mode:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# shared-keymode
The following example specifies the shared unique keymode:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no shared-keymode
Related Commands Command
show sme cluster
Cisco MDS 9000 Family Command Reference
21-32
shared-keymode
no shared-keymode
Modification
This command was introduced.
Description
Displays Cisco SME cluster information.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x