Fcalias Name - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

fcalias name

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcalias name
To configure an FC alias, use the fcalias name command. To disable an FC alias, use the no form of the
command.
Syntax Description alias-name
vsan
vsan-id
Defaults
None.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines To include multiple members in any alias, use the FCID, fWWN, or pWWN values.
Examples
The following examples show how to configure an fcalias called AliasSample on VSAN 3.
switch# config terminal
switch(config)# fcalias name AliasSample vsan 3
switch(config-fcalias)#
Related Commands Command
member (fcalias
configuration mode)
Cisco MDS 9000 Family Command Reference
8-12
fcalias name alias name vsan vsan-id
no fcalias name alias name vsan vsan-id
The name of the fcalias. Maximum length is 64 characters.
The fcalias is for a VSAN.
The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Description
Configures alias member for a specified zone.
Chapter 8 F Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x