Clear Ip Access-List Counters - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

clear ip access-list counters

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear ip access-list counters
To clear IP access list counters, use the clear ip access-list counters command in EXEC mode.
Syntax Description
list-name
Defaults None.
Command Modes EXEC.
Command History Release
1.1(1)
Examples The following example clears the counters for an IP access list:
switch# clear ip access-list counters adminlist
Related Commands Command
show ip access-list
Cisco MDS 9000 Family Command Reference
4-56
clear ip access-list counters list-name
Specifies the IP access list name (maximum 64 characters).
Modification
This command was introduced.
Description
Displays IP access list information.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x