S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
New and Changed Information
Table 1
you where they are documented in the Cisco MDS 9000 Family Command Reference .
The Cisco MDS 9000 Family Command Reference applies to Cisco NX-OS Release 4.1(3), but describes
all features in Cisco SAN-OS releases. If you are running Cisco SAN-OS 3.x or lower software on an
MDS switch, refer to the Cisco MDS 9000 Family CLI Command Reference for the release train that
applies to the release on your switch.
As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases
Note
before 4.1(1b) still apply.
Table 1
New and Changed Commands in the Cisco MDS 9000 Family Command Reference
Feature
New and Changed Commands for Cisco NX-OS Release 4.1(3)
Call Home
Port Guard
Port Owner
F port Trunking
OL-18089-01, Cisco MDS NX-OS Release 4.x
summarizes the new and changed commands for Cisco MDS NX-OS Release 4.1(3) and tells
Description
destination-profile
(Added the HTTPs URL and transport method
to the syntax description)
errdisable detect cause link-down
switchport owner
feature
command
(Added features hhtp-server,
fport-channel-trunk, npiv and npv to the
syntax description)
switchport
(Added the F and NP port mode)
show flogi database interface
command
command
command
command
command
Cisco MDS 9000 Family Command Reference
Where Documented
D Commands
E Commands
S Commands
F Commands
S Commands
Show Commands
xxxiii